The SAT Systems three channel diver communications sets can be supplied either in a rack mountable case or in a portable rugged case. Both units are simplex only.
Rack mount
Our rack mount 3 diver communications set is designed to be fitted into a rack cabinet or frame in a dive control room.
All the connections, except that of the supervisor’s headset, are made at the rear of the unit leaving a clean uncluttered front panel.
It will normally be mains powered and the built in battery will provide full functionality in the event of mains power failure.
Each diver is connected to the communications set using a single-twisted pair cable.
Separate send and receive volume controls are fitted, neither volume control can be turned totally ‘Off”. A recording outlet allows the conversation to be recorded, as required.
Portable
The portable 3 diver communications set is compact, robust and designed to be splash proof in operation.
Special care has been taken to select the front panel components for durability in a marine environment and it is usually powered from its internal sealed 12V lead acid battery, which is recharged between uses.
This unit works in simplex only where the supervisor controls the direction of the communications using either the front panel mounted PTT switch or a remote PTT connected to the headset socket.
Each diver is connected to the communication set using a single-twisted screened pair cable.
The set is in listen mode until the supervisor uses the PTT switch on the front panel to communicate with one or both the divers.
Optional items in this mode are a fist microphone with PTT switch or a headset with PTT switch.
Separate send and receive volume controls are fitted, neither volume control can be turned totally ‘Off”. A recording outlet allows the conversation to be recorded, as required.
Size: 270mm wide x 240mm high x 120mm deep (Portable version) / 3U x 19″ x 200mm (Rack Mount version)
Weight: 2 kg including batteries
Power output: 3.5 Watts continuous into 8 Ω 10W peak
Power supply: 230VAC
Battery life: 12 hours with 10% talk time
Input: Balanced transformer isolated suitable for most dynamic microphones up to 200 Ω impedance.
Output: Suitable for dynamic earphones from 8 to 200 Ω
Optional accessories: Headset with boom microphone and PTT switch.
 |
||
Thank you for your interest in receiving a Quotation for our Communication Equipment. |
||
 |
 |
 |
| Please register on our Helpdesk, supplying your full company details | Please check the email account that you used when registering, we have sent you an email with a link to activate your account | Once your account is activated - Login to our helpdesk and select Request and Quotation |
| Please Click Here To Register Now! | If you do not receive our activation email or experience any problems registering, please Contact Us and we will manually create your account. | Login To Our Helpdesk Now! |
Our Diver Communication sets are all hand assembled in our own workshop, these units are designed for continuous and extended usage.
We offer a Return to Base facility for in-house servicing and repairs of all our units.
Spares are also available on request.
Existing clients please login to our Helpdesk to arrange the return of your existing unit for servicing or repair. If you have not yet used our new Helpdesk please register here to gain access. – Thank you
